Introduction: Why Study PIK3CD (PI3Kδ) with ELISA?
The PIK3CD gene encodes the p110δ catalytic subunit of Class I phosphoinositide 3-kinases (PI3K). This isoform is highly enriched in leukocytes, making it central in cell signaling, immune regulation, and oncology research. Quantification of PI3Kδ protein is critical for:
-
Monitoring pathway activation in signal transduction studies.
-
Evaluating drug target engagement in pharmacological models.
-
Supporting cell biology workflows where quantitation of signaling intermediates is required.
Authoritative references: NCBI Gene, NCI PI3K pathway overview, NIH Reproducibility Resources.
Principle of the PIK3CD ELISA
The sandwich ELISA format is the most widely used for PIK3CD:
-
Capture antibody immobilized on a high-binding plate binds PI3Kδ from samples.
-
Detector antibody recognizes a different epitope, typically biotinylated.
-
Streptavidin-HRP binds biotin, and addition of TMB substrate develops a measurable signal.
-
Optical density (OD) is read at 450 nm.
Key background on ELISA: NIH Training on Immunoassays, CDC laboratory QA.
Sample Types and Matrix Effects
Common Matrices:
-
Serum
-
Plasma (EDTA, Heparin, Citrate)
-
Cell lysates and tissue extracts
Matrix Interference Factors:
-
Lipemia, hemolysis, or icterus.
-
High protein content in lysates.
-
Heterophilic antibodies in serum.
Guidelines for biospecimen handling: NCI Biospecimen Research, NIH Biorepositories, CDC preanalytical considerations.
Standard Curve and Calibration
-
Use recombinant PIK3CD standard to establish a 6–8 point calibration curve.
-
Recommended curve fit: 4-parameter logistic (4-PL) or 5-parameter logistic (5-PL).
-
Weighting (1/Y²) improves fit at lower concentrations.
-
Curve validation requires R² > 0.99 and acceptable residuals.
Statistical foundations: NIST/SEMATECH Handbook, NIST Statistics Programs.
Assay Validation Parameters
To ensure reproducibility, follow bioanalytical method validation guidelines (see FDA overview, NIH reproducibility standards):
-
Limit of Detection (LOD): Typically 2–3x SD above blank.
-
Lower Limit of Quantification (LLOQ): Lowest concentration with CV < 20%.
-
Linearity: Assessed via dilution series; expected recoveries within 80–120%.
-
Precision:
-
Intra-assay CV ≤ 10%
-
Inter-assay CV ≤ 15%
-
-
Accuracy: Spike-recovery studies in serum/plasma.
-
Specificity: Exclude cross-reactivity with PI3Kα (PIK3CA) or PI3Kβ (PIK3CB).
-
Parallelism: Dilution of endogenous samples aligns with standard curve.
-
Stability: Confirm freeze-thaw and storage stability.
Performance Evaluation
Example QC Acceptance Ranges:
| Parameter | Acceptance Range |
|---|---|
| Intra-assay CV | ≤ 10% |
| Inter-assay CV | ≤ 15% |
| Spike recovery | 80–120% |
| Linearity | R² > 0.99 |
| LOD / LLOQ | Experimentally defined |
| Cross-reactivity | < 5% with PI3Kα/β |
These criteria align with public health and research lab practices (CDC QA, FDA methods).
Troubleshooting Guide
-
High background: Improve washing, increase blocking with BSA or casein.
-
Low sensitivity: Extend incubation or confirm antibody integrity.
-
Edge effects: Pre-equilibrate plates, use calibrated incubators.
-
Non-linear dilution: Reassess minimum required dilution (MRD).
Useful references: NIH Lab Training, CDC biospecimen QA.
Alternative Approaches to Quantifying PIK3CD
-
Western blot: Confirms size but semi-quantitative. (Yale Medicine Research)
-
Flow cytometry: Detects intracellular PI3Kδ in leukocytes. (Harvard Research)
-
Mass spectrometry: Detects peptides with high specificity. (MIT Research)
Best Practices for Researchers
-
Always include QC controls with each run.
-
Track assay performance with Levey-Jennings plots (CDC QC guidance).
-
Record lot numbers and validate lot-to-lot bridging studies.
-
Archive raw absorbance data in public repositories (NCBI GEO, NLM databases).
PIK3CD ELISA, PI3Kδ quantification, p110δ protein ELISA, sandwich ELISA kit, PI3K pathway quantification, PI3K delta signaling, PIK3CD assay validation, LOD LLOQ ELISA, ELISA troubleshooting, serum vs plasma ELISA, parallelism ELISA, spike recovery assay, 96-well plate absorbance 450 nm, PI3K delta protein detection.
Conclusion
The PIK3CD (PI3Kδ) ELISA is a reliable, high-throughput method for quantitative protein measurement in serum, plasma, and cell lysates. By following rigorous validation protocols and referencing authoritative research standards from NIH, FDA, CDC, and NIST, researchers can ensure robust, reproducible results.
![AffiELISA® Mouse Phosphatidylinositol 4, 5-bisphosphate 3-kinase catalytic subunit delta isoform ELISA [ Pik3cd]](https://affigen.com/cdn/shop/files/5BAFG-E4345_5D_20AffiELISA_C2_AE_20Cattle_20IFNg_20Kit_20High-Resolution_20Interferon_20Gamma_20ELISA_20Detection_00bede69-9e48-4981-b1ca-e185cb2f7c6a_535x.png?v=1712856057)

